2017 F150 Wheel Bearing: Ultimate Guide to Maintenance and Replacement

The 2017 F150 wheel bearing is a critical component that ensures smooth and safe driving. When it fails, it can lead to a loss of control, increased tire wear, and even accidents. In this article, we will explore everything you need to know about the 2017 F150 wheel bearing, including its symptoms of failure, replacement process, and maintenance tips.

Symptoms of a Failed 2017 F150 Wheel Bearing

Grinding or humming noise: This is the most common symptom of a failed wheel bearing. The noise will typically increase in volume and pitch as you drive faster.

Vibration: A failed wheel bearing can cause vibrations in the steering wheel, floorboard, or seat.

Loose or wobbly wheel: If the wheel bearing is severely damaged, the wheel may feel loose or wobbly when you shake it.

Increased tire wear: A failed wheel bearing can cause the wheel to wobble, which can lead to uneven tire wear.

Replacement Process for a 2017 F150 Wheel Bearing

Replacing a 2017 F150 wheel bearing is a complex task that requires specialized tools and knowledge. It is recommended to have the work done by a qualified mechanic. However, if you are confident in your abilities, you can follow these steps:

Gather your tools and materials: You will need a jack, jack stands, lug wrench, socket wrench, and a new wheel bearing.

Safely lift the vehicle: Place the jack under the vehicle and raise it until the tire is about 6 inches off the ground. Secure the vehicle with jack stands.

Remove the tire: Use the lug wrench to loosen the lug nuts and remove the tire.

Remove the brake caliper: Use a socket wrench to remove the bolts that hold the brake caliper in place. Carefully lift the caliper off the rotor and secure it out of the way.

Remove the hub assembly: Use a socket wrench to remove the bolts that hold the hub assembly in place. Carefully pull the hub assembly off the spindle.

Press out the old wheel bearing: Use a press to press the old wheel bearing out of the hub assembly.

Press in the new wheel bearing: Use a press to press the new wheel bearing into the hub assembly.

Reassemble the hub assembly: Place the hub assembly back on the spindle and tighten the bolts.

Reattach the brake caliper: Place the brake caliper back on the rotor and tighten the bolts.

Reinstall the tire: Place the tire back on the hub assembly and tighten the lug nuts.

Lower the vehicle: Slowly lower the vehicle to the ground.

Maintenance Tips for 2017 F150 Wheel Bearings

Inspect your wheel bearings regularly: Regularly inspect your wheel bearings for signs of wear or damage. Look for any cracks, chips, or pitting.

Lubricate your wheel bearings: Lubricate your wheel bearings every 30,000 miles or as per the manufacturer's recommendations.

Avoid overloading your vehicle: Overloading your vehicle can put extra stress on the wheel bearings and lead to premature failure.

Success Stories

Customer A: "I had a grinding noise in my front wheel. I took my truck to the mechanic and they diagnosed it as a failed wheel bearing. They replaced the bearing and the noise went away. I'm so glad I got it fixed before it caused any serious problems."

Customer B: "My truck started vibrating when I drove over 50 mph. I took it to the mechanic and they found that the rear wheel bearings were worn out. They replaced the bearings and the vibration went away. My truck drives like new again."

Customer C: "I was driving on the highway when my front wheel suddenly locked up. I was able to pull over safely and call a tow truck. The mechanic said that the wheel bearing had seized up and caused the wheel to lock up. They replaced the bearing and I was back on the road in no time."

Conclusion

The 2017 F150 wheel bearing is a critical component that ensures smooth and safe driving. By following the tips and tricks in this article, you can help extend the life of your wheel bearings and avoid costly repairs.

Symptom	Cause
Grinding or humming noise	Failed wheel bearing
Vibration	Loose or worn wheel bearing
Loose or wobbly wheel	Severely damaged wheel bearing
Increased tire wear	Failed wheel bearing causing wheel to wobble

Maintenance Task	Frequency
Inspect wheel bearings	Every 30,000 miles
Lubricate wheel bearings	Every 30,000 miles
Avoid overloading vehicle	Always

2017 F150 Wheel Bearing: Ultimate Guide to Maintenance and Replacement